Nora4 Battery Box Clasps / Catch Plates 

   
Nora4 replacement battery box clasps and catch plates, set of two (i.e. 2 clasps and 2 plates).  Suitable for Nora4 alloy CNC and ABS battery boxes. Also Nora2 battery box.

£12                  

Nora4 ABS Battery Box Lid

   
ABS replacement lid for Nora4 battery boxes, with catch plates.  Available for standard battery box that uses 1s2p battery pack, or for 2x individual 18650 battery box.  Also available for 1x21700 battery box.  Black or Grey ABS.  Note, you will quite possibly need to contact us when ordring, else you might order the wrong thing,  particularly if you have battery box with RH cable gland. 

£18                

Edna Alloy Battery Box Lid 

   
Aluminium alloy screw on, replacement lid for Edna battery box. Standard version, or available with a gear loop to secure to helmet and prevent loss.

£12                   

Nora3 Alloy CNC Battery Box Lid 

   
Aluminium alloy CNC replacement lid for Nora3 battery box. Highly wear resistant upgrade to standard Nora3 delrin lid.  Stainless hex screws and battery box O rings available separately

£22                   

Nora3 Rude Bolts

Pair of anodised thumbs bolts for Nora 3 battery box lid. Stainless construction, with screw driver slot to aid removal if overtightened. Orange, purple or black. Tool free alternative to the regular stainless hex screws.  Not tested for cave diving !!

£8       Low stock                  

Nora2 Battery Box Lid

   
Replacement Nora 2 aluminium machined battery box lid, with catch plates and latches.

£26      Sorry, out of stock                

Nora1 Battery Box Lid 

Replacement aluminium battery box lid for Nora 1 box. Use catch plates from original lid. Replacement catch plates, latches. O ring available separately.

£10                    

Lamp Cable

Lamp cable, 2 core 4.8mm diameter, grey.  Compatible with Lil' Monkey Battery boxes for DIY lamp projects etc.

1 metre length.  Compatible m8 cable gland also available.

£6                

Nora 1s2p battery pack repair kit  (for repair of two battery packs)

Includes 2 x inner and 2 x outer heatshrink wraps (pre cut to length). 2 x protection circuit PCBs, and 2 x jst connectors with high quality silicone leads. 

Note - Soldering required to connect protection circuit and jst lead. Take care, these are easily damaged, hence why we supply a set of two!! 

£8

Nora Battery Box O Rings

Pack of 2

£1

Edna battery holder upgrade kit   

If you already have an Edna box, the new battery holder is available as a DIY kit. This can be retrofitted to the Edna battery box to conveniently accomodate a single 3.7v 18650 battery, protected (typically 69mm long).  Kit includes the battery holder and the cable connecting circuit board.  Soldering is required to connect lamp cable to the circuit board in cable gland end of battery box.

Note, this adaption is not compatible with the Edna battery packs if you're currently using these, as there is no space available in box for the JST connector.  Edna screw top lid shown in last photo for illustration of connection in to box, not included.

£18                  

Edna battery holder (for Protected battery)  

Original Edna battery holder, for a single Protected 18650 battery, with JST connector.

£14       Low stock               

Edna battery holder (for Unprotected battery) 

Original Edna battery holder, for a single Unprotected 18650 battery, with JST connector. This battery holder includes a battery management / protection circuitry. However, use unprotected batteries with caution as not idiot proof.

£16      Low stock               

Nora4 AA battery holder 

Nora4 battery holder, for 3xAA batteries, with JST connector.  Useful expedition / reserve, though insufficient power density to realise highest Nora light output levels.  (Battery box not included).

£22       Sorry, out of stock