www.customduo.co.uk

CustomDUO

www.customduo.co.uk

Petzl Duo - helmet fixing

The Petzl Duo is the outstanding low-mid cost caving lamp, and can be easily modified to helmet mounting 'fixo' specification. With a suitable LED upgrade, and decent quality low self discharge NiMh batteries, the Petzl Duo is without doubt the best mid range caving lamp available.

 

The Duo was designed specifically for caving, and consequently knocks the socks off even the best of the low cost general purpose headlamps, on every level. Well not quite! Whilst extremely robust, in their original form they lack the output of many modern LED headlamps. However, with CustomDUO LED upgrades to suit most budgets, you will have a high quality caving lamp that is more reliable, versatile and suitable for purpose than any low cost, high output, general recreational headlamp. 

 
 
 

gallery/fixo2

Remove Duo headband and cut away strap holder on box. Small wire snips work well.

gallery/fixo4
gallery/fixo5

Trim back the grey plastic headband mount on back of lamp.

A bit more. Almost done !

New Duos (Modu'led 5 LED version, elastic headband) are available online from £60 (UK) and can be easily modified to the more expensive helmet mounting 'fixo' specification, as outlined below.

 

https://www.petzl.com/GB/en/Sport/SPECIALIZED-headlamps/FIXO-DUO-LED-14

 

 

gallery/fixo3
gallery/fixo6
gallery/fixo9
gallery/fixo8
gallery/petzlhelmet
gallery/omniecrin

Until it looks like this.

 

 

Get some suitable stainless screws.

 

 

Available in our Web Shop

 

 

Spend a few seconds fitting one of our lovely upgrade modules. 

 

Download petzl helmet drilling template (link below). Print it out and double check dimensions as it printed out at wrong scale for us. Now just ignore the template anyway, use your initiative and make sure you get the holes positioned correctly (especially on battery box).

 

The cable can be routed inside of the helmet. The headset or battery box can be threaded between the inside of the helmet and the cradle, and the cable simply looped under the bottom lip of the helmet, at the front and back.

 

There is no need to drill entry / exit holes in the helmet for the cable, no need to cut and rejoin the Duo cable, and no need to detach Duo cable at battery box or headset (do not try as this is borderline impossible, and even if successful, the lamp is unlikely to ever be quite right again.

gallery/home page tab 1