Skip to main content

CustomDUO

www.customduo.co.uk

DUO Modules   PITLAMP Modules  FlippinTec  Scallywag  Bargain Bazaar  CustomDUO Shop   
Omni v5 > Omni 'Simple' > Gecko Spot > Gecko Side >  

now available with new Cree XP-G3 s5 LEDs providing minimum of 172 lumen/watt @85degC and 187 lumen/watt @25degC. Light temperature 5000K (neutral white)

 

.... and also 3000k WARM Cree XP-G3 s3 LEDs providing minimum of 156 lumen/watt

 

 

Omni v5 

 

 

The Omni v5 is the most advanced of our LED conversion modules available for the Petzl Duo.

  

The v5 features the latest s3 bin Cree XP-G2 LEDs, delivering potential light outputs of up to 570 lumen, and offers user programmable power settings. The spot and flood LEDs can be operated separately, or blended together at a range of power settings, in a sequence that best suits your individual needs.  

 

 

Specification 

  

  

Twin high power s3 XP-G2 LEDs (156 lumen @ 350mA @ 85 degC) 5500k neutral tint, as standard

 

Smooth spot optic for distant focus & flood LED (with efficient optic for forward bias), for maximum usability.

 

LEDs operated separately or blended together.

 

Programmable; range of power combinations (see table below) to best suits your individual requirements.

 

570 lumen output (combined high spot 285 lumen and high flood 285 lumen).

 

Battery charge level indicator. Red SMD LED will blink 1-5 times to indicate battery charge (5 flashes being 'full charge'). Visible on hand held in front of lamp. 

 

Super robust circuit architecture. Custom heat sink, and discreet thermal management.

 

Very simple fitting; push fit directly into existing Duo pilot bulb connections. Will work with any Petzl Duo.

 

No power drain when lamp is switched 'off' with batteries connected.

 

6.0 volt maximum input.

 

Progressive dimming at end of battery charge, i.e. lamp will not just shut off when batteries are flat and cannot sustain full output.

 

 

Output lumen figures provided are for XP-G2 LEDs (@156 lumen/watt). Output figures for new XP-G3 LEDs (@172 lumen/watt) will be proportionally higher. 

 

 

 £70 
 

 

 

 

 

 

 

 

 

Operation (factory default settings)

 

 

To switch between the four default power settings (see following table), in a looping sequence, use the down switch on the Petzl Duo. Switch on-off-on to sequence between settings 1-2-3-4 ... 1-2 etc.

 

'Double switch' to operate moon mode (10mA flood), i.e. (swift double operation of switch, i.e. on-off-on). The red indicator LED will blink 1 to 5 times to indicate battery charge level. Lamp will run in moon mode until next switched off. 

 

Omni v5 features 3 second 'last' mode memory. When the lamp has been on for more than 3 seconds in any setting and is switched off; when switched back on it will automatically restart in the last used setting. 

 

Output lumen figures provided are for XP-G2 LEDs (@156 lumen/watt). Output figures for new XP-G3 LEDs (@172 lumen/watt) will be proportionally higher. Output figures below could be anticipated for latest s3 3000k warm LEDs.

 

 Setting (switch in sequence)Spot LED Flood LED Output (est.)Duration (est. 2500mAh eneloops)

1 (fixed)

-150 mA67 lumen16 hours 

2 (programmable)

-350 mA156 lumen  7 hours  

3 (programmable)

150 mA350 mA223 lumen  5 hours  

4 (programmable)

 
700mA  -285 lumen 3.5 hours 

'Double switch' operation

-10 mA4 lumen   includes battery level indicator

 

    

Setting 1 is fixed. Settings 2, 3 and 4 can be user programmed. See following table for available combinations. 

 

 

 Cree XPG2 (s3)Flood 'Off' (0mA)Flood (50mA) Flood (150mA)Flood (350mA)Flood (700mA)

Spot 'Off' (0mA)

- 22 lumen  67 lumen (1) 156 lumen (2) 285 lumen  

Spot (50mA)

22 lumen 44 lumen 89 lumen  178 lumen  307 lumen 

Spot (150mA)

67 lumen  89 lumen  134 lumen  223 lumen (3) 

352 lumen 

Spot (350mA)

156 lumen 178 lumen  223 lumen  312 lumen  441 lumen 

Spot (700mA)

285 lumen (4) 307 lumen   352 lumen   441 lumen   570 lumen 

 

  

 

 

v5 Programming button

 

For information on how to operate, program and configure settings, see Omni v5 operation

 

 

 

 

Omni v4 now discontinued.

 

 

 

The Online Shop allows payment with most debit and credit cards, without the requirement for a Paypal account. Add product to cart and option is offered at checkout. Customduo also accept UK cheque or bank transfer.   

 

International orders welcome. We are currently shipping internationally (outside UK) at no extra postal charge.  For more details please see International Delivery